Change text size:   Increase font size   Reduce font size  |   Print page:   Print this page
  |   Contact us   
 
tradespeople
English

Carpentry 

For licensing purposes, carpentry means the cutting and placing timber, or timber composites, in construction work on site to erect framing and fix components or assemblies used in construction work such as stairs, windows, doors, wallboards (excluding plaster boards which is dry plastering), floors, etc. It includes the erection of metal framing and the construction of formwork in preparation for concreting.

Works encompassed by the term carpentry include, but are not necessarily limited to:

  • minor non-structural concreting associated with a dwelling where that concreting is ancillary to carpentry work
  • concreting for footings/structural support associated with outdoor construction (eg. pergolas, timber decks, timber and metal fencing and the like) [does not include concrete paths, slabs etc which are works specifically considered to fall within the scope of the category of general concreting and require the holding of that category]
  • exterior wall cladding (including non-structural stone veneer facing or cladding, but excluding brick)
  • curtain walling
  • internal timber cladding of walls and ceilings and non-structural stone cladding of internal walls
  • non-habitable outdoor shelters or structures (excluding brick or stone) such as pergolas, gazebos and the like, but not including garages, sheds or carports
  • skylights
  • awnings
  • prefabricated glass fences
  • timber retaining walls not requiring approval under the Local Government Act 1993 (work involved in retaining walls that require such approval is work within the category of structural landscaping).

Qualifications

Completion of:

  1. CPC30211/ CPC30208/ BCG30203 Certificate III in Carpentry; or
  2. CPC32011/ CPC32008 Certificate III in Carpentry and Joinery; or
  3. BCG30798 Certificate III in General Construction (Carpentry — Framework/Formwork/Finishing), TAFE course #7078; or
  4. Qualification 10888 Certificate Ill in General Construction (Carpentry)- Housing — Trade TAFE Course #2192; or
  5. Certificate III in Carpentry and Joinery Trade TAFE Course #2149; or
  6. Certificate Ill in Carpentry and Joinery Trade TAFE Course #5158.

To find a Registered Training Organisation that provides the qualification listed above, refer to the information on building licensing courses.

Previous licence and supervisor certificate holders

Reissue of expired unconditioned licences and supervisor certificates

If you have ever held a licence or supervisor certificate in the current prescribed categories (Home Building Regulation 2014, clauses 13 and 14, excluding clause 13(a)(ii)) that was not subject to restrictions or conditions and you apply for a new licence or supervisor certificate, your previous licence or certificate will be accepted in lieu of the current qualification requirements.

Reissue of expired licences and supervisor certificates held in the last five (5) years that were subject to conditions or restrictions

If you have held a licence or supervisor certificate in the last five (5) years that was subject to restrictions or conditions in the prescribed categories (Home Building Regulation 2014, clauses 13 and 14, excluding clause 13(a)(ii)), we will assess your application and reissue you a licence or certificate that reflects the scope of work that your licence or certificate covered. This may include being subject to conditions or restrictions.

Top of page

Get a free copy of Adobe Acrobat Reader so you can access PDF versions of our information.